A Leading Integrator of Industrial Automation and Robotics Systems!

Electric Cylinder/Linear Motion/

IP65 Servo Electric Cylinders

  • Product Detail
  • Inquiry

IP65 Servo Electric Cylinders are a type of linear actuator that offers protection against dust and water. These cylinders are designed to meet the rigorous demands of industrial environments, where dirt, moisture, and other contaminants can potentially damage equipment and machinery.
The IP65 rating indicates that the cylinders are protected against dust and low-pressure water jets from any direction. This means that they can withstand exposure to harsh conditions such as wet or dusty environments, without suffering damage or failure.
IP65 Servo Electric Cylinders typically consist of a cylinder body, rod, motor, and drive system. The cylinder body provides a housing for the rod and motor, while the rod extends and retracts to provide linear motion. The motor and drive system power the rod’s movement, allowing for precise control of position and speed.

Model selection Description of IP65 Servo Electric Cylinders: You are welcome to load down our e-catalogue of IP65 Servo Electric Cylinders

Can IP65 Servo Electric Cylinders withstand high pressure water jets?
No, IP65 Servo Electric Cylinders are only protected against low-pressure water jets. If high-pressure water jets are present, additional protection measures may be necessary to ensure the safety and reliability of the cylinders.

What is the maximum operating pressure of an IP65 Servo Electric Cylinder?
The maximum operating pressure of IP65 Servo Electric Cylinders can vary depending on the specific model and manufacturer. However, most IP65 Servo Electric Cylinders are designed to operate at pressures up to 10 bar (145 psi). It’s important to note that the maximum operating pressure may be limited by factors such as temperature, speed, and load. Therefore, it’s recommended to consult the manufacturer’s specifications to determine the maximum operating pressure for a particular IP65 Servo Electric Cylinder.

What are the factors that affect the operating pressure of an IP65 Servo Electric Cylinder?
There are several factors that can affect the operating pressure of an IP65 Servo Electric Cylinder, including temperature, speed, load, and fluid viscosity. Here are some of the main factors to consider:
Temperature: High temperatures can increase the fluid viscosity and reduce the operating pressure of the cylinder. Therefore, it’s important to ensure that the cylinder operates within its rated temperature range.
Speed: High speeds can increase the fluid pressure and reduce the operating pressure of the cylinder. Therefore, it’s important to choose a cylinder with a suitable speed rating for the application.
Load: Heavy loads can increase the fluid pressure and reduce the operating pressure of the cylinder. Therefore, it’s important to choose a cylinder with a suitable load rating for the application.
Fluid Viscosity: High fluid viscosity can increase the operating pressure of the cylinder. Therefore, it’s important to choose a fluid with a suitable viscosity for the application.
In summary, the operating pressure of an IP65 Servo Electric Cylinder can be affected by several factors, including temperature, speed, load, and fluid viscosity. Therefore, it’s important to choose a cylinder with suitable ratings for the application and to ensure that it operates within its rated parameters.

If you could tell me more specific information about your application scenario, such as industry, work environment, load characteristics, etc., I can provide you with more targeted selection suggestions.

Youtube: https://www.youtube.com/@tallmanrobotics

Facebook: https://www.facebook.com/tallmanrobotics

Linkedin: https://www.linkedin.com/in/tallman-robotics

You are welcome to watch more projects or visit our website to check other series or load down e-catalogues for further technical data. 

    PersonalBusinessDistributor

    Prev:

    Next: