Is Single Axis Linear Actuator just a Device?

Single Axis Linear Actuator is an automatic mechanical instrument, which is not as flexible as manual machinery. Therefore, in practical work, it is necessary to master the change of its accuracy, which requires the use of the above methods of measuring linear module. Together, we must select linear modules with guaranteed quality in order to maximize the basic accuracy of linear modules.

The planning style is useful. For industrial production, it is not necessary to plan Single Axis Linear Actuator like a work of art. It only needs to be useful. On the basis of being useful, we should also reduce the use of space to the greatest extent, that is to say, we should achieve compact planning, the overall volume of the linear module is moderate, and the bearing capacity should be large enough.

The working parallelism is measured by placing a standard ruler on the platform of the high-quality and durableSingle Axis Linear Actuator and the scale limit that the experimental indicator can move within the inner slider. The maximum difference of the reading within the moving scale limit of the servo electric cylinder is the measured value. High precision and strong bearing capacity. Precision should be one of the characteristics of the mechanical real line module.

Compared with machinery and labor, a great advantage is that the precision is much higher and will not change too much with the passage of time. This ability can ensure a good effect on the industrial assembly line and reduce the labor consumption, Linear motor and bearing capacity can also be customized according to different specific conditions of each enterprise. If the product weight required to pass through the linear module is relatively large, the data with better bearing capacity can be selected for production. Positioning accuracy when measuring the accuracy of Single Axis Linear Actuator, its maximum stroke is taken as the reference length, and then it is marked by the absolute value of the maximum error between the distance moving from the reference orientation to practice and the command value.

Multi joint manipulator: it has sensitive action, small motion inertia and strong universality. The micro electric steel can grasp the workpiece close to the base and bypass the obstacles between the body and the operation machinery. With the demand of production, it puts forward higher and higher requirements for the sensitivity, positioning accuracy and working space of the multi joint arm. However, Single Axis Linear Actuator is only a kind of instrument, and the oscillation produced by long-term work will also change its accuracy.

Therefore, the uniaxial arm needs to pay attention from time to time to see whether its accuracy is still in the original setting. It can be continuously used for one cycle under the condition of air cut-off, and an alarm will be given together to prompt the operator. The direct manipulator cooperates with various non-standard fixtures, and the soft cable assisted manipulator can complete the lifting of workpieces of various shapes. The device can be fixed on the ground or suspended, and the guide rail type cannot be used.

You are welcome to visti video centre of Tallman Robotis Limited to watch more projets and applications.



Leave a message