Linear Guide with Belt

Linear Guide with Belt is linear module of synchronous belt.Linear Guide with Belt is mainly composed of synchronous belt, sliding table, aluminum alloy profile, coupling, motor, photoelectric switch and other parts.  At present, in the motor selection for Belt drive Linear Guides, servo motor drive and step motor drive can be selected respectively. The specific type of motor to be selected should be selected according to the requirements of your own equipment.

Here we introduce our Belt drive Linear Guide module TMB150-CM for your projects.

From this data table, you can see the basic technical parameter by lead, deceleration ratio, max speed, motor rotating speed , rated thrust as follows: 

These videos display Belt drive Linear Modules inmult axis configuration and long stroke linear actuators 

Tallman Robotics Limited’s Belt drive Linear Guides has the characteristics of long service life,fast running speed, accurate running position,low noise during operation, easy maintenance. At the same time, its cost performance is also very advantageous. In addition, this linear module of synchronous belt can be used in a wide range of industries, such as automation equipment, mechanical arm, transport belt,photography, and other automatic industries. 

FAQ about Belt drive Linear Motion Actuators

1. What workstations are Belt drive Linear Motion Modules used in the 3C electronics industry?

      Belt driven linear actuators perform pick-and-place for small components like chips and connectors. They handle PCB loading and unloading on assembly lines, move camera modules for optical inspection stations. They position dispensers for glue application on phone frames, drive screwing heads for battery and housing assembly,transfer trays between testing and packaging stations, and adjust laser markers for engraving serial numbers. High speed and smooth motion suit these tasks. The clean operation and long strokes work well for 3C production lines.

2. What are the advantages of Belt drive Linear Modules in the handling and palletizing of new energy batteries?

    Belt actuators provide high speed for rapid battery transfer between forming and aging racks. They offer long strokes up to 5 meters, which matches large battery tray sizes,run quietly, which improves factory working conditions,have low maintenance because no lubricant drips onto battery cells. Their high acceleration reduces cycle time for palletizing,and lightweight construction reduces moving mass, saving energy. They tolerate dust from electrode materials better than ball screws. They cost less per meter for long travel distances.

3. Can belt driven actuators be used in automated packaging production lines?

    Yes, belt driven actuators work very well in packaging lines. They push products into cardboard boxes for case packing, pull film for flow wrapping machines,and position sealing bars on vertical form-fill-seal equipment. They transfer cartons between labeling and coding stations, reject defective packages into bins, drive pushers for collating multiple items before shrink wrapping. Their high speed matches packaging line rates, smooth acceleration prevents product tipping, and long stroke handles various box sizes. They operate reliably in dusty environments.

You are welcome to  https://www.youtube.com/@tallmanrobotics to watch our video centre for more projects or visit our website to check other series or load down e-catalogues for further technical data.