Linear Sliding Guides Will Be Delivered to Germany

Linear Sliding Guides

Manufacturers of Linear Sliding Guides can follow the below steps in application of automation equipment:

1.Enviornment of Linear Sliding Modules:Thre are general environment, clean environment and harsh environment.

2.Determine the installation direction of module slide. Confirm that the module slide is installed horizontally, wall design installation or vertical structure installation.

3.Linear Sliding module determines the load handling station.

4.Calculate the velocity and acceleration of the platform.

5.Linear Sliding Guide allows torque check: MA, MB, MC: static value of torque and state calculation of processing deceleration state (uniform).

6.The accuracy of Linear Sliding Guide shall meet the requirements of the grading system: clarify the accuracy of the repeated positioning system required by the enterprise, walking parallelism requirements, etc.

7.Determine the motor installation style: in the conventional slider installation module and the direct connection type, the motor is installed on the left side, the motor is installed on the right side, and one motor is installed on the bottom side

8.Working mode of Linear Sliding Guide travel limit control switch.

9.Determine the motor specification and power of the module slider.

Manufacturers of Linear Sliding table should pay attention to the application of Linear Sliding Guides in automation equipment. The performance index of the module can be measured from the following aspects. Accuracy characteristics of sliding module: including repeated positioning accuracy, positioning accuracy, parallel walking, running straightness, clearance, etc. The motion function characteristics of the module slide: transportable weight, anti torque control ability, operation development speed, acceleration, operation environment noise, etc.

You are welcome to visit video centre of Tallman Robotis to watch more projects and applications.



Leave a message