Linear Stage Actuator is among our waterproof or dust proof ball screw driven linear modules by TMSF100–CR, which has bod width by 100mm, in configuration with Delta servo motor by 100W, 200W, 400W, and thrust can be up to max 1364N. You are welcome to https://www.youtube.com/@tallmanrobotics to watch our video centre for more projects or visit our website to check other series or load down e-catalogues for further technical data.
The housing of our Linear Stage Actuator is made of corrosion-resistant anodized aluminum, enabling Linear Stage Actuator to operate in extreme environments. The outer surface of the actuator is made of precision extrusion, with T-shaped grooves on both sides. It is installed by pressing blocks, which can ensure a qualified, clean and concise installation. T-shaped slots are distributed throughout the fuselage to ensure that the installation in multiple directions and the installation of some auxiliary items, such as sensors, can be directly fixed on the fuselage.
The guidance system(multi stage linear actuator) is an embedded ball linear guide. The design of the ball guide rail provides high rigidity, high speed and high precision, and reduces friction, noise and vibration for the slider. A magnetic sealing strip is integrated on the sliding block, which can prevent the dust and dirt outside from entering the actuator, and also prevent the tiny dirt inside the actuator from entering the environment, so that the actuator or multi stage linear actuator can be used in highly polluted environments and run in clean rooms.