Leading Supplier of Linear Modules,Electric Grippers,Motion Control Systems
Micro Linear Actuators or Micro linear servo driver is a kind of micro servo electric push rod. It integrates micro motor, reducer, screw mechanism, sensor and drive control system, which can realize accurate servo control at any position within the travel range.Built in absolute position sensor, the position information will not be lost after power failure, and there is no need to return to zero
Electric push rod, also known as linear driver, is a new type of linear actuator mainly composed of motor push rod and control device. It can be considered as an extension of the structure of rotating motor.
Micro Linear Actuators or electric push rod is a kind of electric driving device that transforms the rotary motion of the motor into the linear reciprocating motion of the push rod.It can be used in various simple or complex technological processes as an executive machinery to realize remote control, centralized control or automatic control.
Micro Linear Actuators are composed of drive motor, reduction gear, screw, nut, guide sleeve, push rod, sliding seat, spring, shell, turbine, micro control switch, etc.
Electric push rod is a new type of electric actuator. Electric push rod is a new type of linear actuator mainly composed of motor, push rod and control device, which can realize remote control and centralized control. The electric push rod moves back and forth within a certain range of travel
Micro Linear Actuators from Tallman Robotics have novel and exquisite design, small volume, high precision, complete synchronization, good self-locking performance, sanitation, direct motor drive, and does not need pipeline air source and oil circuit. Micro Linear Actuators have been widely used in production lines, automobiles, ventilation window opening, military industry, stage, textile, sewage treatment and other industrial equipment, mostly used in household appliances, kitchenware, medical instruments Sports driving unit for automobile and other industries.
Detailed Technical Parameters of Micro Linear Actuators from Tallman Robotics Limited :
|
Description item |
TM-SLA Micro Linear Actuators Technical Parameter |
||||
| Size number |
08 |
11 |
|||
| Stroke (mm) |
30 |
50 | 50 | 100 |
150 |
| Lead (mm) |
1 |
2 |
|||
| Maximum speed (mm / s) |
50 |
100 |
|||
| Maximum pushing force (n) |
55 |
300 |
|||
| Force repeatability |
±10% |
||||
| Vertical maximum load (kg) |
1 |
1.5 |
|||
| Repeatability (mm) |
±0.02 |
||||
| Non rotation accuracy of push rod (°) |
±1.5 |
||||
| Controller |
TM-C-20 |
||||
| Rated voltage (V) |
DC24±10% |
||||
| Rated current (a) |
2 |
||||
| Weight (kg) |
0.3 |
0.5 | 0.7 | 0.9 |
1.1 |
| Recommended environment |
0 ~ 40 ℃, below 85% RH (without condensation) |
||||
| Degree of protection |
IP40 |
||||
Optional Accessories of Micro Linear Actuators
1.Encoder: accurately feed back the number of turns of the motor spindle through the number of pulses, so as to accurately calculate the stroke change of the electric push rod and realize accurate control.
2.Potentiometer: used to feed back the resistance of the motor, so as to reflect the stroke position of the push rod, and finally achieve the purpose of controlling the push rod to stop at any position in the middle of the stroke.
3.Hand operated device: some push rods of worm gear structure and gear structure can be installed with hand operated shaft. In case of power failure, the position of the push rod can be adjusted by hand after connecting the hand operated wrench.
4.Hall feedback: a Hall circuit board is installed on the motor shaft, which can accurately feed back the rotation number of the motor through the hall principle, so as to achieve the purpose of accurate control of the push rod.
5.PLC control: PLC access port can be provided to achieve real-time process control.
6.Controller: also known as transformer, it is divided into controllers that control single, 2, 3 and multiple sets. Change AC220V voltage into 24V voltage
7.Operator: also known as manual controller, it is divided into single row, 2-row, 3-row and multi row operators. Connected to the controller.
You are welcome to visit video centre of Electric Grippers and Linear Modules(Micro Linear Actuators) for news, more projects and applications.
