News

Modular Linear Axis with Belt Drive Delivered to Australia

Modular Linear Axis with Belt Drive also named as Belt drive linear modules from Tallman Robotics has been delivered to client from Australia.

You are welcome to visit Modular Linear Axis with Belt Drive or Belt drive linear modules for further tech data.

As a mechanical product, linear module will inevitably present some large and small problems in the application process, such as mechanical wear, mechanical defects, etc. when linear module and other mechanical products show defects, if the problems are not handled in time, it may be a big trouble. There is no doubt that the use of mechanical products can greatly improve work efficiency. Once the mechanical equipment shows defects, it will affect the production progress, and in serious cases, it will affect the delivery date, which will lead to breach of contract; Therefore, in general, if the problems of mechanical products can be handled in time, it is certainly the best.


Today, let’s introduce how to deal with the heating phenomenon of linear module in the process of application.


In general, the linear module will generate heat more or less in the process of application. For example, when doing high-speed reciprocating linear motion, heat energy will be generated in the friction process, which will cause the linear module to generate heat. This kind of heat generation belongs to the normal field, and there is no need to worry too much; If you can, stop the linear module for a few minutes and restart it.


In addition to normal heating, linear modules may have abnormal heating. For example, when water drops fall on the linear module, they will vaporize immediately, which is accompanied by the problem of jitter; In this case, we should pay attention to it. If it is not handled in time, the linear module may be damaged due to heating. Wear the screw and guide rail. Thus, the service life of the linear module is affected.


If the linear module presents this abnormal heating phenomenon, and it is also accompanied by jitter, according to the market response test and the research of Machinists and engineers, it is generally caused by the slider in the table fixed rod motor, that is, the slider is the root cause of this abnormal heating phenomenon, so the user should consider checking whether there is an abnormality in the slider, or directly replacing the slider.


If there is a heating problem in the application process of linear module, it is generally the two phenomena mentioned in the above article. We can judge according to the heating situation of linear module we use, and then analyze and deal with the specific problems. The above is the answer about how to deal with the problem of heating in the process of using linear modules. I hope it can help us.

Prev:

Next:

Leave a message