News

Ring and Track System is finished for American Client

Ring and Track Systems from Tallman Robotics Limited have been finished and will be transported to client from USA.

In the automatic production line, the workpiece needs to be automatically transmitted between different stations. These works are completed by various conveying lines, and the circular assembly line is the first choice for the automation transformation of factories and enterprises at present. The annular assembly line is composed of linear guide rail + circular guide rail + positioning system + auxiliary materials, which can be integrated into the customer’s equipment or frame structure according to the customer’s needs. The track can be oval or rectangular or other shapes, and the bearing sliding seat can be driven by continuous or indexing movement.


What are the core configurations of Ring and Track System?

1.Controller
The controller of automatic Ring and Track System is composed of program counter, instruction register, instruction decoder, timing generator and operation controller. It is the “decision-making mechanism” that issues operation commands to the equipment. It controls the starting, speed regulation, braking and reverse of the motor by changing the wiring of the main circuit or control circuit and changing the resistance value in the circuit, so as to coordinate and command the operation of the whole production line.

2.Robot hand
When the controller gives the operation instruction, the manipulator is required to automatically perform the work. It is generally composed of travel mechanism, driving device, detection device, control system and complex machinery. It can not only run the pre arranged program, but also act according to the principles and programs formulated by artificial intelligence technology. Instead of manual operation, various heavy and high-precision operations are carried out.

3.Servo motor
Servo motor refers to the engine that controls the operation of mechanical components in the servo system. It is an indirect speed change device of auxiliary motor, which can make the control speed and position accuracy very accurate In the automatic control system, it is used as an actuator and has the characteristics of small electromechanical time constant, high linearity and starting voltage. It can convert the received electrical signal into angular displacement or angular velocity output on the motor shaft.

4.Sensor
Sensor is the primary link to realize automatic detection and automatic control. In modern industrial production, especially in the process of automatic production, various sensors should be used to monitor and control various parameters in the production process, so as to make the equipment work in a normal state and make the products meet the required quality.

5.Industrial camera
It is a key component in the industrial vision system to convert the image captured by the machine into a special image processing system instead of the human eye. The image system performs various operations on these signals to extract the characteristics of the target, and then controls the equipment action on the scene according to the discrimination results.

6.Instrumentation
The instruments and meters of Ring and Track System are instruments or equipment used to detect, measure, observe and calculate various physical quantities, material components and physical parameters. During the operation and use of the automatic ring pipeline, various instruments and meters are required, such as measuring the parameter values required by the control process, such as pressure, liquid level, flow, temperature, etc.


The above content is an introduction to the core configuration of the composition of Ring and Track System. The ring assembly line can be used as a circular production line, which has been widely used in the precision automation of factory production, greatly improving the production efficiency and reducing the floor space.
In addition, Ring and Track System involves many parts for operation, and the core configuration of each part is responsible for the corresponding function operation. Therefore, the construction of automatic ring assembly line not only costs a high cost, but also requires very professional technology and rich experience.

Prev:

Next:

Leave a message