Rotary Electric Gripper

Rotary Electric Gripper, also termed as Electric Rotary Actuator,rotary gripper module from Tallman Robotics Limited has following structural features:
*The whole steel structure frame is adopted, with high strength, which can meet the needs of users for high-strength operation.
*High strength structure design, long life and stable operation of large torque motor to meet the high-strength continuous operation of users.
*The self-lubricating sliding support is firmly and reliably installed with long service life.
*The optimized structural layout ensures a good vision.
*T-shaped sliding pair is adopted, which has high strength, uniform stress and long service life

Detailed Parameters of Rotary Electric Gripper, rotary gripper module from Tallman Robotics Limited:

Item	Rotary Electric Grippe TM-MGBR Technical  Parameters
Size number	11
Stroke (°)	180 (unilateral 90)
Maximum clamping force (n)	40
Force repeatability	±10%
Repetition accuracy (°)	±0.05
Controller	TM-C-20
Rated voltage (V)	DC24±10%
Rated current (a)	2
Weight (kg)	0.5
Recommended environment	0 ~ 40 ℃, below 85% RH (without condensation)
Degree of protection	IP40

Rotary Electric Gripper is driven by the motor to realize the tightening and release of the claw finger, the positioning point is controllable, and the clamping force is controllable; Through the upper computer control of PLC, industrial PC, single chip microcomputer and motion controller, the functions of object grasping and positioning are realized. It is the flexible execution terminal of the equipment.

Rotary Electric Gripper is applied in the field of industrial automation. Compared with pneumatic finger, it has the following characteristics: some models have self-locking mechanism to prevent workpiece and equipment damage caused by power failure, which is safer than pneumatic finger; The opening and closing of the clamping jaw has the function of programmable control to realize multi-point positioning. The pneumatic clamping jaw has only two position stop points, and the electric clamping jaw can have more than 256 position stop points.

The acceleration and deceleration of Rotary Electric Gripper are controllable, and the impact on the workpiece can be minimized, while the clamping of the pneumatic clamping claw is an impact process, and the impact exists in principle and is difficult to eliminate; The clamping force of the electric clamping claw can be adjusted and the closed-loop control of the force can be realized. The accuracy of the clamping force can be up to 0.01N and the measurement accuracy can be up to 0.005mm.The force and speed of pneumatic gripper are basically uncontrollable, so it can not be used in high flexible fine operation occasions.

Rotary Electric Gripper/ Rotary gripper module can work normally in the environment with ambient temperature between 0 ° C and 50 ° C and relatively low oxygen content, which must be equipped with special equipment for manual work. The robot electric gripper is sealed in a smooth shell package to avoid the deposition of dust or other substances. This design is sufficient to meet the requirements of high hygiene standards in food processing. The man-machine cooperation robot of our company can meet various special requirements from preliminary field classification to finished product packaging and logistics at the end of the production line, involving food raw material preparation, food processing, food packaging and other links. This opens the door to a wide range of business applications and breaks the traditional thinking and the cost-benefit assumption of the food processing industry.

In the industrial automation industry, mobile robots will use mechanical arms to carry and sort materials, such as sorting robots and explosive disposal robots.In medical automation equipment, such as blood analyzer, biochemical analyzer and blood smear preparation instrument, manipulator is also used to dispatch and carry test tubes, test tube racks and glass slides. In some of the above applications, the manipulator end gripper is often realized by pneumatic gripper. However, the pneumatic clamping claw needs to use an air pump, which has many restrictions on some of the above occasions. In addition, the pneumatic clamping claw will also produce noise, so there is an electric clamping claw, which abandons the air source, simplifies the factory and is used when connected to power.

For example, in the food processing industry, the quality of raw materials and ingredients is very important. At the same time, the consistency and gentleness of the subsequent processing and treatment of these raw materials and ingredients are also very important to maintain the original quality. The robot electric gripper grabs and moves the packaged food, and the preparation before food transportation also requires gentle and fine operation. Robot electric gripper can meet these precise requirements. Robotic electric grippers have proven useful in food processing environments. Food processing has specific requirements for the temperature, humidity and hygiene of its environment.

Rotary Electric Gripper: How It Can Revolutionize Your Business

Introduction

In recent years, there has been a growing trend of businesses looking for ways to automate their processes. This has led to the development of various new technologies, one of which is the Rotary Electric Gripper.

Rotary Electric Gripper is a device that can be used to automate the process of picking up and moving objects. It is a game-changer for businesses because it can help them increase their productivity and efficiency while reducing their costs.

If you are interested in finding out more about the Rotary Electric Gripper and how it can help your business, then read on!

 

What is Rotary Electric Gripper?

Rotary Electric Gripper is a device that is used to automate the process of picking up and moving objects. It is made up of several components, including a motor, a drive mechanism, and a hand-like attachment. The motor powers the drive mechanism, which is then used to move the hand-like attachment to pick up and move objects. The Electric Gripper is able to pick up objects of various sizes and shapes and can be used for a number of different tasks.

 

How can Rotary Electric Gripper help your business?

Rotary Electric Gripper is a great way for businesses to automate the process of picking up and moving objects. This is especially useful for businesses that rely heavily on manual labor. By using the Rotary Electric Gripper, businesses can save time, money, and effort that would otherwise be spent on manual labor. Additionally, the Rotary Electric Gripper can be used for a variety of tasks, making it a versatile device that can be used in a wide range of applications.

 

Why is Rotary Electric Gripper a game-changer for businesses?

Rotary Electric Gripper is changing the way businesses operate by introducing automation into their processes. This technology can help businesses increase their productivity, enabling them to complete tasks faster and more efficiently. Additionally, by automating their processes, businesses can save money and reduce their costs by eliminating the need for manual labor. The Rotary Electric Gripper is a game-changer for businesses because it not only increases their productivity but also helps them to save money.

 

How can you get your hands on a Rotary Electric Gripper?

Rotary Electric Gripper is readily available on the market. You can purchase the device online through various suppliers or through your local hardware store. Additionally, many suppliers provide installation and repair services, so you can have the device properly installed and maintained.

Conclusion

: Rotary Electric Gripper is a great way for businesses to increase their productivity while reducing their costs. It is a game-changer for businesses because it introduces automation into their processes, helping them complete tasks faster and more efficiently. Additionally, the Rotary Electric Gripper is readily available on the market and can be purchased online or through your local hardware store. If you are looking to automate your processes and increase your productivity, then the Rotary Electric Gripper is a great option.