Water Proof Linear Modules

Water Proof Linear Modules resist direct water jets, splashes, or temporary immersion without internal damage. The housing uses welded or gasketed stainless steel. Double or triple lip seals protect the carriage entry slot. A compressed air purge port maintains positive internal pressure. Stainless steel bearings and coated ballscrews resist corrosion. Cable entries use waterproof glands. IP ratings range from IP66 (powerful jets) to IP68 (continuous immersion). Applications include fish processing, car wash systems, marine deck machinery, and outdoor agricultural automation.

Technical Summary of TallMan Robotics Water Proof Linear Modules

Water proof linear modules use sealed structures to prevent water ingress during linear motion. The design integrates corrosion resistant materials, sealed guide rails, and protected drive systems such as ball screws or belts. Gaskets, sealing strips, and end covers block moisture entry at all interfaces.

Water Proof Linear Modules(Organ Cover Lead Screw Linear Module and Belt Linear Modules) from Tallman Robotics Limited or Fully enclosed linear modules of the organ cover can effectively prevent dust, water and oil, better maintain the lubrication performance of the screw rod and guide rail inside the slide module in the complex production environment, and prevent the falling dust or debris from falling into the slide book and affecting the operation.

The chart below illustrates Water Proof Linear Modules with product photos and full specification details.

Belows Cover Water proof Lead Screw Linear Actuators: 

For more further technical parameter,please visit: https://www.tallman-robotics.com/dust-proof-linear-modules/

PMC executes comprehensive in-process inspection protocol. Each Water Proof Linear Module undergoes final verification before dispatch.

TallMan Robotics operates an in-house laboratory and inspection systems to control quality across all linear module production stages.

Hardness tester	Altimeter	Laser interferometer
Quadratic element	Vibration tester	Soundproof room

Please review the videos,we enforce strict testing during production and prior to shipment.

Special packing uses cartons placed inside plywood crates for long-distance protection.

FAQs about IP65 WaterProof Linear Modules

• What makes Water Proof Linear Modules?

       Double lip seals block water entry. Stainless steel housing resists rust. Compressed air purge pushes water away from seals. Cable glands seal wire entries.

• What IP rating resists direct hose spray?

       IP66 survives powerful water jets from any direction. IP69K survives high pressure hot water spray. Choose IP69K for daily washdown with chemicals.

• Can I submerge a waterproof linear module completely?

       Yes for IP68 rated modules. Specify maximum depth and duration. Standard IP68 works at 1 meter for 30 minutes. Custom units work at 10 meters for 8 hours.

• What bearing material survives salt water exposure?

       Ceramic hybrid bearings with 316L stainless steel rings. Plastic plain bearings also work. Standard chrome steel rusts within hours in salt water.

• Can Water Proof Linear Modules operate under water continuously?

        Yes with full IP68 sealing. Fill the housing with dielectric oil instead of grease. Replace air purge with oil circulation. Use a pressure compensator for deep submersion.

• How do you test a waterproof module after installation?

       Block all ports except one. Apply 0.5 bar compressed air. Submerge the module in water. Look for bubbles. No bubbles means the module seals correctly.

• Do waterproof modules resist corrosion?

       Yes, material selection supports corrosion resistance. This extends service life in wet conditions.

• What industries use waterproof linear modules?

       Food processing, pharmaceuticals, and marine equipment use them. These fields require moisture protection.

You are welcome to  https://www.youtube.com/@tallmanrobotics to watch our video centre for more projects or news, visit our website load down e-catalogues for further technical data.